ATCA-9305 is an Emerson ATCA board with Dual Cavium CN5860 Processors and Freescale PowerQUICC III MPC8548 processor as management procesor.Due to its design, the board requires two BSPs. This README file covers the support package for the Cavium processors.The ATCA-9305 provides two Cavium processor complexes. The majordevices on each complex consist of the Cavium CN5860 processor, twoStratixGX bridges, SDRAM, RLDRAM, an I2C EEPROM, socketed ROM, Flash,and the PCI bus interface.Features:* Cavium Processor : The Cavium CN5860 processor is a highly programmable, high-performance 16-core architecture operating up to 800 MHz.* Ethernet Switch: The Broadcom BCM56802 is a sixteen-port, 10 GbE switch which interconnects the processors using SPI to XAUI bridges. The functionality includes both 10-Gbps XAUI and 1-Gbps SGMII PHY interfaces.* Stratix GX Bridge: There are two packet routing Altera SPI-4.2 high-speed interconnect to XAUI bridges per CN5860 processor.* Ethernet: 10/100/1000BASE-T Ethernet ports are accessible via the front panel RJ45 connectors and through the base channel on the back panel. The 10 GbE ports route to the back panel through the fabric and RTM connectors.* Serial Port: 8250* PCI/PCIe: The PCI bus allows for read/write memory access between the MPC8548 processor, Ethernet switch, and Cavium processors.